Basic Boating Information

Return to Table of Contents

1

Boating Terms

2

Hull Designs

3

Boat Length

4

Propulsion

5

Capacity

6

Hull Identification Numbers

7

Homemade Boats

8

Recall Hotline

9

Theft Prevention

10

Loaning a Boat

11

Lines and Knots

12

Trailers and Trailering

13

Boat Ramps

14

Weather

15

Float Plans

16

Boat Maintenance

17

Fueling

18

Environmental Considerations

19

Chapter Review

LINES AND KNOTS

Knowing the “ropes” is essential to good boating. Rope, or line as sailors call it, serves three purposes; lifting, pulling and holding. There are hundreds of knots, bends, and hitches, but knowing just a few of the more important ones will make your day on the water more enjoyable.

  • Square Knot – two overhand knots used to join two lines of equal size
  • Clove Hitch – simple hitch used to secure the line to a railing or cylindrical structure
  • Bowline – universal bend used to make a temporary eye in the end of a line
  • Securing a line to a cleat – make one complete round turn around the base of the cleat and then make at least 3 figure eights. A locking hitch may be used to complete the process by twisting the last figure eight before securing the looped end onto the cleat.

Use, Types and Care of lines

A line serves 3 main functions:

  • Holding – mooring a boat to a dock or anchoring
  • Pulling – skiing, tubing
  • Lifting – lifting equipment from a boat up onto a dock.

Types of line

  • Natural fiber rope – quickly rots if exposed to moisture for an extended length of time. Keep dry and out of direct sunlight.
  • Synthetic rope – nylon line comes in 3-strand and double-braided. Three-stranded is easy to make eye splices for mooring or tow lines. Polypropylene floats and is commonly used for skiing and tubing. Double-braided is the strongest.
  • Breaking strength – the boater should know the breaking strength of the lines they are using. Consult the manufacturer ratings for various types and size of line. A line that exceeds the breaking strength may suddenly snap and can create a very dangerous, and unsafe situation.

Parts of a line

  • Bitter End – the very end of the line.
  • Standing part – the area between the two bitter ends, or between the bitter end and the working part
  • Working part – the part that is around a cleat, railing, etc.
  • Eye – a man made loop in the end of a line or a natural loop that occurs when line is coiled.
  • Bite of an eye – an area of the line that has looped around itself. NEVER place your foot or hand into the “bite” of an eye. Any sudden tension on the line can injure a person.

Line safety

  • When “paying out” line (as when letting out line to a skier), watch that the line does not chafe on sharp objects.
  • Be careful of rings and watches as they may be caught on the line.
  • Any knot in a line reduces the breaking strength of the line by 10%.
  • If the line begins to pay out rapidly, let go of the line to prevent skin abrasions or fingers being caught in the line.
  • Too much strain on a line may cause it to “part” (break). The snap-back effect can cause serious injury

   
Copyright © 2004-2007 American Boating Education
Last Modified: April 28, 2005